Copyright
Trace Engineering Co., Inc.
Telephone (360) 435-8826
Part Number 3471
5916 195th Street, NE
Fax (360) 435-2229
Released: Thursday, April 29, 1999
Arlington, WA 98223 USA
PM
6-3
PM
The PM is the basic power module component. PM components are
fabricated from 0.090 T6061 aluminum plate, and are powder-coated to
prevent corrosion (except the blanks for unused breaker openings).
Included are the lid, the back and sides, two blanks, the door and
associated baffles and screens, door latches, neoprene gaskets, and
aluminum brackets for securing the module to a concrete pad or wooden
platform. The gaskets, baffles, and screens for the door and cabinet
bottom prevent insects and small animals from entering the cabinets.
Install the neoprene perimeter gasket only after all PM’s and PM-ADD’s
have been set atop each other to ensure complete sealing.
#
Qty
Part No.
Description
1
1
LID
2
1
ELEC-MOD (back & sides)
3
2
BLANK
4
1
DOOR
5
1
LATCH
6
1
FEET
7a
1
PM mounting hardware includes 16 each: 401
bolts,
440 nuts, 466 flat washers, 492 internal starwashers
7b
1
inverter fastener assortment includes 6 each:
425
bolts, 444 nuts, 485 internal starwashers, 468
flatwashers, 2147 external starwashers.
7c
1
module fastener assortment includes 14 each:
3190
carriage bolts, 3192 nuts, 485 internal starwashers,
2147 external starwashers, 465 flat washers.
7
7
7
8
9
a
c
b
6
1
2
3
4
5
