background image

Head office

TR Equipment AB, Sweden

Phone: +46 140 38 50 60

[email protected]

www.trequipment.com

Group Subsidiaries

TR Group Inc, US, Phone: +1 (800) 752 6900 

TR Equipment Ltd, UK, Phone: +44 (0) 844 335 8386

TRanspoRehaMed GmbH, Germany, Phone: +49 (0) 212 645850-0

Hygiene Equipment 

Designed for People

TR 2000/3000/9650

Shower trolleys and Mobile Bath Lift System

Hygiene Equipment 

Designed for People

TR reserves the right to make 

design changes and/or  

improvements without notice.

Registered at Medical Products 

Agency, Sweden, 

as a MD Class 1 product, 

MDD 93/42EEC.

Service manual

Always study this manual carefully before operating the 
Shower Trolley.

Operating instructions and recommended maintenance  
procedures are explained in the following pages.

If you have any questions regarding the operation or  

maintenance of your Shower Trolley and cannot find the  

answer in this manual, please contact us.

Only qualified staff who are trained and certified and who 

can understand all operating and safety procedures may 
operate and service this equipment.

The Trolley is designed for years of trouble free operation, with 
proper use and maintenance.

2016-1

Summary of Contents for TR 2000













































































Reviews: