TR-Electronic SSI-BOX, Operating Manual

Page: 26 / 45

Operating Manual SSI-BOX PROFIBUS-DP (PNO)
ELECTRONIC GmbH
TR - ELECTRONIC GmbH, Global Quality Management, Eglishalde 6, 78647 Trossingen, Tel. ++49 (0)7425-228-0, Fax ++49 (0)7425-228-33
Date: 25.04.2012 TR - E - BA - GB - 0013 - 03 Page 26 of 45
3.6.2.5 Measuring units per revolution
Defines the number of increments displayed by the encoder for each revolution of the
encoder shaft.
Input (Box+rotary encoder class-2/16, class-2/32)

Lower limit
1 increment / revolution

Upper limit 8192 increments per revolution (max. value see rating plate)

Default 4096
3.6.2.6 Total measuring range [units] hi and total measuring range [units] lo
Together, these parameters define the total number of increments displayed by the
encoder before it starts again from zero.
Inputs for HI word (Box+rotary encoder class-2/16, class-2/32, TR Gear

Lower limit
0 increments

Upper limit
512 increments
(depending on the total capacity:
max. Number of increments per rev. * max. Number of revolutions,
see rating plate)

Default 256
Inputs for LO word (Box+rotary encoder class-2/16, class-2/32, TR Gear

Lower limit
0 increments

Upper limit
65535 increments
(depending on the total capacity:
max. Number of increments per rev. * max. Number of revolutions,
see rating plate)

Default 0
3.6.2.7 Revolutions numerator hi and Revolutions numerator lo
This parameter (together with the parameter "Revolutions denomiator") defines the
total number of revolutions displayed by the encoder before it starts again from zero.
Inputs for HI word (Box+rotary encoder TR Gear)

Lower limit 0

Upper limit
4

Default
0
Inputs for LO word (Box+rotary encoder TR Gear)

Lower limit 0

Upper limit 65535

Default
4096