Printed in the Federal Republic of Germany
TR-Electronic GmbH 2013, All Rights Reserved
08/31/2017
TR - ECE - BA - DGB - 0105 - 03
Page 97 of 103
7 Setting the Sercos address via the service channel
At present this function is not implemented.
The setting of the Sercos address via the service channel by means of IDN / S-0-1040 can only be
performed if the switch position is adjusted
to 0x00, see chapter “Setting the Sercos address by means
With write access on the service channel the new Sercos address is taken over and stored
permanently.
Parameter-Format, sercos address
name
sercos address
attribute length (octet)
2
data type and display format
unsigned decimal
function
parameter
positions after decimal point
0
write protection
manufacturer-specific
conversion factor
1
scaling / resolution of LSB
1
unit
n/a
minimum value
1
maximum value
255
scope of parameter
local
