Installation / Preparation for commissioning
TR-Electronic GmbH 2005, All Rights Reserved
Printed in the Federal Republic of Germany
Page 78 of 132
TR - ECE - BA - DGB - 0045 - 06
11/06/2018
4 Installation / Preparation for commissioning
4.1 Connection – notes
Mainly, the electrical characteristics are defined by the variable connection technique.
Whether the measuring system supports
•
additional interfaces, e.g. a SSI interface
•
external inputs such as the Preset
•
a reference pulse or inverted signal sequences in case of an incremental
interface
is therefore defined by the device specific pin assignment.
The connection can be made only in connection with the device specific pin
assignment!
At the delivery of the measuring system one device specific pin assignment in printed
form is enclosed and it can be downloaded afterwards from
. The
number of the pin assignment is also noted on the nameplate of the measuring
system.
