Causes of faults and remedies
TR-Electronic GmbH 2012, All Rights Reserved
Printed in the Federal Republic of Germany
Page 68 of 68
TR - ECE - BA - DGB - 0091 - 02
11/15/2012
9 Causes of faults and remedies
Fault
Cause
Remedy
Position skips of the
measuring system
Electrical faults
EMC
Perhaps isolated flanges and couplings made of plastic
help against electrical faults, as well as cables with twisted
pair wires for data and supply, see chapter 6.1 "Cable
definition", page 52.
Extreme axial and
radial load on the
shaft or a scanning
defect.
Couplings prevent mechanical stress on the shaft. If the
error still occurs despite these measures, the measuring
system must be replaced.
