Parameterization via TRWinProg
TR-Electronic GmbH 2012, All Rights Reserved
Printed in the Federal Republic of Germany
Page 66 of 68
TR - ECE - BA - DGB - 0091 - 02
11/15/2012
8.3.4 Analog values clipping
With the parameter
Analog values clipping
the behavior of the analog output
quantity at the programmed limits is determined. If
Yes
is selected, then in case of
exceeding the limits the analog values are fixed (frozen) to the programmed values. If
No
is selected, different analog values are output until the physical limits of the analog
interface are reached.
Selection
Description
Default
Yes
Analog output quantity is limited
X
No
Analog output quantity is not limited
Figure 10: Example: Analog values clipping = Yes
Figure 11: Example: Analog values clipping = No, “straight line flat”
Figure 12: Example: Analog values clipping = No, “straight line steep”
