TR-Electronic CEK-65, User Manual

Page: 104 / 155

Parameterization

TR-Electronic GmbH 2008, All Rights Reserved Printed in the Federal Republic of Germany
Page 104 of 155 TR - ECE - BA - DGB - 0073 - 07 06/27/2017
7.1 Overview of available classes
Object Classes Purpose Access Page
0x01: Identity Object
Contains all device specific data, such as
Vendor ID, Device type, Device status etc.
Get 105
0x02: Message Router Object
Contains the measuring system’s supported
class codes and the max. number of
connections.
Get 112
0x04: Assembly Object
Returns the position value of the measuring
system.
Get 114
0x06: Connection Manager Object
Contains connection specific attributes for
triggering, transport, connection type etc.
Get 117
0x23: Position Sensor Object
Contains all attributes for programming the
measuring system parameter, such as
scaling and count direction.
Set/Get 119
0xF4: Port Object
Contains the available Ports, Port name and
Node address on the port.
Get 130
0xF5: TCP/IP Interface Object
Contains all attributes for the configuration
of the TCP/IP network interface such as IP
address, Subnet mask and Gateway.
Defines how the measuring system gets
these parameters: FLASH, DHCP or
hardware switch.
Set/Get 133
0xF6: Ethernet Link Object
Contains connection specific attributes,
such as Transmission rate, Interface status
and the MAC-Address.
Get 139
Table 8: Overview of available classes