Causes of faults and remedies
TR-Electronic GmbH 2013, All Rights Reserved
Printed in the Federal Republic of Germany
Page 170 of 171
TR - ECE - BA - DGB - 0102 - 03
09/23/2014
General
Status Code
Name
Description
0x22
Invalid Reply
Received
An invalid reply is received (e.g. reply service
code does not match the request service code, or
reply message is shorter than the minimum
expected reply size).
0x23
Buffer Overflow
The message received is larger than the receiving
buffer can handle. The entire message was
discarded.
0x24
Message Format
Error
The format of the received message is not
supported by the server.
0x25
Key Failure in path
The Key Segment that was included as the first
segment in the path does not match the
destination module. The object specific status
indicates which part of the key check failed.
0x26
Path Size Invalid
The size of the path which was sent with the
Service Request is either not large enough to
allow the Request to be routed to an object or too
much routing data was included.
0x27
Unexpected
attribute in list
An attempt was made to set an attribute that is
not able to be set at this time.
0x28
Invalid Member ID
The Member ID specified in the request does not
exist in the specified Class/Instance/Attribute.
0x29
Member not
settable
A request to modify a non-modifiable member
was received.
11.3 Other faults
Fault
Cause
Remedy
Position skips
of the measuring
system
Strong vibrations
Vibrations, impacts and shocks, e.g. on presses, are
dampened with "shock modules". If the error recurs
despite these measures, the measuring system must be
replaced.
Electrical faults
EMC
Perhaps isolated flanges and couplings made of plastic
help against electrical faults, as well as cables with twisted
pair wires for data and supply. Shielding and wire routing
must be performed according to the specification.
Extreme axial and
radial load on the
shaft may result in a
scanning defect.
Couplings prevent mechanical stress on the shaft. If the
error still occurs despite these measures, the measuring
system must be replaced.
