Printed in the Federal Republic of Germany
TR-Electronic GmbH 2016, All Rights Reserved
09/20/2016
TR - ECE - TI - DGB - 0292 - 01
Page 129 of 159
As long as Watch_table_1 is the active application in the editor work area, you
can select the
Monitor all
command in the menu bar under
Online
or the
corresponding icon in the editor toolbar, in order to establish a connection to the
F-CPU.
If the device status LED in the measuring system flashes with "3 x 5 Hz
repeating", then the tag
ˮ
Tag_1
ˮ must be set to
TRUE
in the monitoring window.
This is done by selecting the relevant field with the right mouse button for the tag
ˮ
Tag_1
ˮ in the
Modify value
column. This opens a shortcut menu. In the menu
select the entry
Modify -> Modify to 1
with the left mouse button.
