Safety Program Creation - Configuration Example
TR-Electronic GmbH 2016, All Rights Reserved
Printed in the Federal Republic of Germany
Page 108 of 159
TR - ECE - TI - DGB - 0292 - 01
09/20/2016
From the network list, select the measuring system whose name you wish to
assign. You can then select the
Assign name
button.
As soon as the name has been assigned, the measuring system is displayed with
a blue tick and the status OK in the network list. The window can then be closed
with the
Close
button.
At delivery and after a factory reset, the measuring system has no device name stored.