Printed in the Federal Republic of Germany
TR-Electronic GmbH 2019, All Rights Reserved
08/20/2021
TR-ECE-BA-GB-0138 v04
Page 11 of 47
2.2 Obligation of the operator prior to commissioning
As an electronic device and for use in potentially explosive areas, the explosion pro-
tection enclosure with integrated measuring system is subject to the provisions of the
EU-directives EMC and ATEX.
Therefore, commissioning of the device is only allowed once it has been established
that the system/machine in which the device is to be installed, complies with the provi-
sions of the EU-directives EMC and ATEX, the harmonized standards, European
standards or the respective national standards.
For use in potentially explosive atmospheres outside the European single market
(EU), the device has an approval according to the IECEx system. The corresponding
national standards and international standards (IECEx) must therefore be observed
during commissioning.
2.3 General dangers with the use of this product
The product, hereafter referred to as
equipment
is manufactured using the latest
technology and according to recognized safety regulations.
Nevertheless, non-
intended use can cause danger to life and limb of the user or third parties or
cause damage to the equipment and other property!
Only use the equipment for its intended use, with safety- and danger awareness and
in compliance with the
Other applicable documents
!
The operator of an electrical system in a potentially explosive environment should
keep the equipment in a proper condition, it should be properly operated and moni-
tored and maintenance- as well as repairs are to be performed. This also includes in-
spection of the equipment for possible transport damage prior to commissioning.
De-energize the system before carrying out wiring work or opening and closing elec-
trical connections. The equipment may not be operated in case of defects and dust
deposits must be removed basically.
