USER’S MANUAL
TE1004_44_01
Thermimport Quality Control
Tel:
+31 0180-631344
Website: http://www.tqcinfo.com
Page 1 of 2
Fax: +31 0180-632917
Email: [email protected]
Pocket Infrared Thermometer
Articlenr. TE1004
Prescribed use
The product is designed for non contact temperature measurement on suitable objects/surfaces.
Operate the device only in dry environment; the contact with moisture has to be avoided.
Features
• Measuring range:
-30°C to +270°C, -22°F to 518°F
• Sample rate:
approx. 1 measurement per second
• Accuracy:
±2.5% of the display or ±2°C/4°F
• Emission ratio:
0.95 (fixed default, not changeable)
• Distance ratio:
6:1 (e.g. at 60cm distance: 10cm diameter)
• Auto Power Off:
After approx. 7-8 seconds
• Operation and environ-
mental conditions:
0°C to 50°C (+32°F to +122°F), relative air humidity max. 80% (not condensing)
Safety instructions
• Keep the product out of reach of children.
• Due to inaccuracy of the temperature measurement, which is possible under certain conditions, the "actual" temperature
can deviate from the values displayed on the LCD. This is why the product must not be applied, if very precise
measurement values are required (e.g. melting or boiling points, chemical reactions or the like).
• Never point the laser either directly or (due to reflecting surfaces) indirectly at the eyes.
LASER RADIATION CAN CAUSE IRREPAIRABLE DAMAGE TO THE EYES. BE EXTREMELY
CAREFUL WHEN MEASURING NEAR HUMANS OR ANIMALS.
Inserting/replacing batteries, change-over °C/°F, battery notes.
• Carefully open the battery compartment on the bottom side of the IR thermometer.
• There is a small switch in the battery compartment, via which you can select the desired temperature unit (°C or °F).
• Then insert two AAA batteries into the battery compartment, observing the proper polarity. The respective figure in the
battery compartment will help you to do this.
• Close the battery compartment.
• If no indication appears on the display during the activation of the measuring procedure or, if the IR thermometer
immediately switches off, while trying to switch the laser on, please replace the batteries with new ones.
Please do observe the following notes when handling the batteries:
• Keep batteries out of reach of children.
• Do not let batteries lie around openly. There is the risk of batteries being swallowed by children or pets. In such case, seek
immediate medical care.
• Leaking or damaged batteries might cause acid burns when getting into contact with skin, so use suitable protective gloves.
• Make sure that batteries are not short-circuited or thrown into fire. There could be danger of explosion!
• Never dismantle batteries!
• Always replace an entire battery pack, don’t mix empty batteries with full ones. Don’t mix batteries with accumulators.
Control elements
1 Outlet opening for the laser beam
2 Backlight button
3 LC Display
4 Carrying strap
5 Opening for IR sensor
6 "MEAS" button for activation of the measuring
procedure and laser sight
7 °C/ °K switch
8 Battery compartment
Functionality
