TQ TQMaX4X Series, Prelimenary Manual

Page: 28 / 42

Preliminary Preliminary User's Manual l TQMaX4XxL UM 0001 l © 2022, TQ-Systems GmbH Page 23
3.3.2 Pinout TQMaX4XxL (continued)
Table 14: TQMaX4XxL pad description
Module
Pad
Signal
CPU
Ball
IO Group Description
Voltage
Level
B1, C1, C2,
D1, D2
V_5V_IN - P
Input Power
Supply
Module Main Power supply
Add some blocking capacitors for
heavy load transients (typ.
47…100μF)
5.0 V
± 5%
L22 V_RTC_IN - P RTC Power supply
2.0 V to
5.5 V
M22 V_VPP G15 P
When not pro-gramming OTP
registers supply must be disabled.
Leave unconnected 1.8 V
K21 V_1V8 - O
Output Power
Supply
V_1V8 power supply
Max. 100 mA
Should be used for Boot-Strapping
1.8 V
± 5%
N21 V_3V3 - O
V_3V3 power supply
Max. 100 mA
3.3 V
± 5%
Y19 V_VDDSHV5
K15,
L14,
L15
O
V_VDDSHV5 power supply
Max. 20 mA
1.8 V /
3.3 V
K6 TQMaX4XxL_HARD_RST# - I
System Signal
Hard Reset to TQMaX4XxL
including Power Cycle
10kΩ Pullup on TQMaX4XxL
5.0 V
± 5%
F8 MCU_PORz - I
Cold reset to CPU via MCU_PORz
10kΩ Pullup on TQMaX4XxL
1.8 V
P19 MCU_RESETz B12 I
MCU Domain warm reset
10kΩ Pullup on TQMaX4XxL
R20 RESET_REQz E18 I
Main Domain warm reset
10kΩ Pullup on TQMaX4XxL
F7 PORz_OUT - O
Main Domain POR status
10kΩ Pulldown on TQMaX4XxL
R19 MCU_RESETSTATz B13 O MCU Domain warm reset status
R22 RESETSTATz F16 O Main Domain warm reset status
N6 TQMaX4XxL_PGOOD - O TQMaX4XxL PGOOD Status
Y18 MCU_SAFETY_ERROR# A20 IO
Error signal output from MCU Do-
main
L18 TRST# D11 I
Debug
JTAG Interface
TCK, TMS: 4.7kΩ Pullup on
TQMaX4XxL
TRST#: 4.7kΩ Pulldown on
TQMaX4XxL
1.8 V
M18 TDI C11 I
T18 TMS C12 I
N18 TCK B11 I
P18 TDO A12 O
K18 EMU0 D10 IO
J18
EMU1
E10
IO
MCU_OBSCLKK0 O
G6 RFU1 - -
Reserved for future use
Do not connect
-
H7 RFU2 - -
R7 RFU3 - -
T6 RFU4 - -
R6 TQ_EEPROM_WC# - I
Factory Test
Only Factory Test only
Do not connect
1.8 V
T9 V_0V85 - P 0.85 V
G8 V_1V8_AUX - P 1.8 V
U18 V_RTC - P 1.8 V
G9 V_1V1 - P 1.1 V
H6 V_VDD_CORE - P
0.75 V/
0.85 V
T8 V_1V8A - P 1.8 V