User's Manual l TQMaRZG2x UM 0100 l © 2021, TQ-Systems GmbH
Page 36
4.3
Weight
The three different TQMaRZG2x versions have the following approximate weights:
•
TQMaRZG2H: 33 ±2 grams
•
TQMaRZG2M: 28 ±2 grams
•
TQMaRZG2N: 26 ±2 grams
4.4
Connectors
The TQMaRZG2x is connected to the carrier board with two 220-pin connectors, EPT part number 402-51101-51.
To avoid damaging the connectors of the TQMaRZG2x as well as the connectors on the carrier board while removing the
TQMaRZG2x the use of the extraction tool MOZIaRZG2x is strongly recommended.
Attention: Component placement on carrier board
2.5 mm should be kept free on the carrier board, on both long sides of the TQMaRZG2x
for the extraction tool MOZIaRZG2x.
The following table shows suitable carrier board mating connectors.
Table 40:
Carrier board mating connectors
Manufacturer
Stack height
Part number
Remark
EPT
5 mm
401-51101-51
On MBaRZG2x
8 mm
401-55101-51
–
The pins assignment in Table 4 and Table 5 refers to the corresponding
For information regarding I/O pins in Table 4 and Table 5, refer to the RZ/G2x documentation (1), (2).
4.5
Protection against external effects
As an embedded module, the TQMaRZG2x is not protected against dust, external impact and contact (IP00).
Adequate protection has to be guaranteed by the surrounding system.
