User's Guide l MBox-Advanced UG 0101 l © 2019, TQ-Systems GmbH
Page 8
4.3.1.6
Power and Reset Button
At the rear side of the MBox-Advanced a Power and a Reset Button is available providing the following functionality.
Table 4:
Power and Reset Button Functionality
Status
Event
System response
No power supply connected
Supply with power
System starts automatically (S0)
System is shut down or in sleep mode
(S3, S4, S5)
Push power button
<5 sec
System starts (S0)
System is running (S0)
System shuts down or turns to sleep mode (S3, S4, S5),
depending on Windows settings
Push power button >5 sec Forced shutdown (S5)
System is running (S0)
Push reset button
Reset is generated
4.3.1.7
Power and General Purpose LED
The MBox-Advanced provides a Power LED and a general purpose LED (optional), visible at the front.
Table 5:
Power LED
Table 6:
General Purpose LED
4.3.2
Optional External Connectors and Interfaces
4.3.2.1
M.2 Socket with B-Key (for I/O devices)
The MBox-Advanced provides an M.2 socket for an M.2 module with 22 mm width and 42 mm length.
A USB and a SATA interface are routed to this M.2 socket.
Single or double sided M.2 modules type 2242 with B or B+M-Key can be inserted.
4.3.2.2
2.5” SATA Socket (Optional)
The MBox-Advanced with 2.5” SATA option provides a SATA socket for a 2.5” mass storage.
Only mass storages with a maximum height of 7mm can be mounted.
The M.2 socket is not available when the SATA option is used.
4.3.2.3
SATA Connector
The MBox-Advanced provides a standard SATA connector, which is only accessible if the back cover of the housing is not
mounted. This interface is for service purposes.
LED colour
Function
Green
Active in Run State (S0)
Blue
Active in Sleep (S3) or Off (S5) state
LED colour
Function
Blue
GPO1 = Low
Red
GPO2 = Low
Green
GPO3 = Low
