manualshive.com logo in svg

TPM TPC-7000 Series, User Manual, Page: 52 / 52

Share
Download
TPM TPC-7000 Series User Manual Download Page 52

TPM

       

                                                                                                                                             

TPC-7000 User Manual

 

 

 

 

52 

5.7. 

Save & Exit Settings 

 

 

BIOS Setting 

Description 

Save Changes and Exit 

Exits system setup after saving the changes.   

Discard Changes and 
Exit 

Exits system setup without saving any changes. 

Save Changes and Reset  Resets the system after saving the changes. 

Discard Changes and 
Reset 

Resets system setup without saving any 
changes. 

Save Changes 

Saves changes done so far to any of the setup 
options. 

Discard Changes 

Discards changes done so far to any of the 
setup options. 

Restore Defaults 

Restores / Loads defaults values for all the 
setup options. 

Save as User Defaults 

Saves the changes done so far as user defaults. 

Restore User Defaults 

Restores the user defaults to all the setup 
options. 

 

 

 

Summary of Contents for TPC-7000 Series





















































Reviews:

No comments