TPM 207-D533-NN, User Manual

Page: 40 / 46

TPM
207-D533-NN User Manual
40
6.1
Station Alias (4000h)
Index Sub-
Index
Name/Description Units Range Data
Type Acc
-ess Default
value OP
Mode Save to
EEPROM
4000h Station Alias
01h Selection _ 0~2 U8 rw 1 All Yes
(OP)
02h Setup (High byte) – 0x00~0xFF U8 rw 0 All Yes (OP)
03h Station Switch – 0x00~0xFF U8 ro – All No
04h Station Alias – 0x0000~0x0000 U16 ro – All No
Index Sub-
Index
Name/Description Units Range Data
Type Acc
-ess Default
value OP
Mode Save to
EEPROM
4000h Station Alias
01h Selection – 0~2 U8 rw 1 All Yes
how to set a station alias (Default is 1)
Value Definition
0 The value saved at 004h in the SII is set as station alias.
1 The value made of object 4000h:02h and dip switch of amplifier is set as station
alias. (*1)
2 Read station alias via AL control word
(*1) If Setting values for both the dip switch and object 4000h:02 are 0, the value of the SII area (0004h) is regard as
Station Alias.
02h Setup (High byte) – 0x00~0xFF U8 rw 0 All Yes (OP)
High byte of Station Alias
How to set the parameters with dip switch and object 4000h:02h
Station Alias (16 bits)
High byte Low Byte
Value set by
4000h:02h
Value set by dip switch
03h Station Switch – 0x00~0xFF U8 ro 0 All No
This parameter is to show the value of Station ID Switch which is in front of device. This value will be refreshed when the
switch is changed.
04h Station Alias – 0x0000~0x0000 U16 ro 0 All No
This parameter is to show the station alias which will be refreshed After power on.