1
Modem Configuration Guide
Netcomm NB9W
Configuring in Layer2 PPPoE for Windows XP and 2000
CONTENTS
1. Network Configuration
2. Re-configure In Layer2 PPPoE
3. Optional
4. Change of password
PLEASE NOTE: Please have your router powered on and connected directly
to your PC via Ethernet cable before you begin as these instruction are based
on Ethernet
1. NETWORK CONFIGURATION
PPPoE connection does not require you to have an IP address or DNS
settings manually encoded on your network card. PPPoE connection uses
authentication to establish the Internet connection and its after doing this that
your router is assigned an IP and DNS settings from TPG.
To begin, your PC needs to receive a private IP address from the router. Most
ADSL routers have DHCP enabled by default that will take care of this.
To ensure your Network Card is ready for this, please follow the following
steps:
A. Click on
Start -> Settings -> Control Panel -> Network Connections
B. Find your Network Card then right click on this and select
Properties
C. Double click on
Internet Protocol TCP/IP
Netcomm NB9W
