34
Chapter 2
Configure Your Network Camera
2. 2 Plug and Play Settings
Plug and Play function enables NVR to automatically find and add cameras. You can enable or disable
this function according to your needs. To configure and view the settings, right click on the Live View
screen and click
Settings
in the pop-up Main Menu, then go to
Camera
>
Device Access
>
Plug and
Play
.
■
Add Without Login
When the cameras and your NVR are in the same network, the cameras will be automatically added
without your account logged in.
■
Device Access Alert
If a new camera is found when the channels are full, your NVR will receive a notification.
■
Devices Limited to Access
After the cameras are added to the NVR, they will be automatically added to the list, which means they
cannot be added to the NVR again automatically. If you want to automatically add the cameras for the
second time, remove the cameras from the devices limited access list.
2. 3 Configure Image Effects
To adjust the image effect, you can configure the picture mode and image settings.
