!
!
!
off Which means that the fiber optic connector is operating
in half-duplex mode. Flashing green indicates for collision.
FDX/HDX Switch
FDX:
The UTP port operate in full-duplex mode ;
HDX:
The UTP port operate in haf-duplex mode;
Notice: You must reset the converter when you achieve the
configuration.
Installation Guide
Configuration
In order to achieve the aim of effectively expanding a Fast
Ethernet network, You can use the converter for example :
1. Position two converters back to back between the following
end devices.
10/100Base-TX
interface
10/100Base-TX
interface
100Base-FX
interface
Twisted-pair
Twisted-pair
Single/multi-mode fiber
Device A
Device B
Converter
Converter
6
5
2. Another effective application is to position one converter
directly between a 10/100Base-TX network and a fiber optic
(FX) device.
Installation Procedure
1. Converter to 10/100Base-TX Device (hub or switch)
Connection
Make sure that the length of twisted pair cable (Category-5)
between 10/100Base-TX device and converter is no longer
than 100 meters.
Connect one end of twisted pair cable to RJ45 jack on the
converter and the other end of the cable to the RJ45 jack on
the 10/100Base-TX device.
2. Converter to Converter or 100Base-FX Device Connection
Connect one (SC) end of a fiber cable to the SC connector
!
!
10/100Base-TX
interface
100Base-FX
interface
Twisted-pair
Single/multi-mode fiber
Device A
Device B
Converter
on the converter and the other end of the cable to the SC
connector on the other converter or 100Base-FX device.
3. Turn on the power
Appendix Specifications
Standard:
IEEE 802.3/IEEE 802.3u
Connector:
1 SC fiber optic; 1 RJ45 jack
Max. Distance:
Twisted Pair(cat5):100m
Multi-mode Fiber Optic: 2km
Single-mode Fiber Optic: 20/40/60km
Power:
external power supply, 9V 0.8A
Temperature:
Operation: -10 to 50
Storage: -40 to 70
Humidity:
10%-90% (non-condensing)
Dimensions:
123mmx67mmx24 mm (LxWxH)
7
TR-932D
TR-962D
User's Guide
7
1
0
3
0
3
8
8
R
e
v
3
.0
10/100Mbps Fast Ethernet Converter
