9
Chapter 2
Use Your Powerline Adapter
2 4 Add Another Powerline Adapter
Add a new powerline adapter into the existing powerline network to extend my network.
For example,
I’ve already set up a powerline network using powerline devices, but the
network does not reach everywhere I need it to. I purchased another one to further
extend my network.
1. Plug the new powerline adapter into a wall outlet near one of the existing powerline
devices.
Pow
erline
AV600
MAX 3680
W,MAX 16A
MAX 3680
W,MAX 16A
AV600
MAX 3680
W,MAX 16A
AV600
MAX 3680
W,MAX 16A
2. Wait for a minute, and check whether the Powerline LED turns on. If it’s on, skip
to step 3. If it’s not, continue with step 2 to pair the new powerline adapter into the
secured powerline network.
a . Press the Pair button on one of the existing powerline devices for 1 second. Its
Power LED starts blinking.
b . Within 2 minutes, press the Pair button on the new powerline adapter for 1
second. Its Power LED starts blinking. When the Powerline LED turns on,
the pairing process is complete.
Existing
Powerline Device
New
Powerline Device
6
AV600
Blinking
On
within 2 minutes
AV600
Blinking
AV600
3. Relocate the new powerline adapter to the place where wired internet access is
needed.
I want to:
How can I do that?
