47
Chapter 4
Configure the Router in Wireless Router Mode
4. 13. IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
a network device’s IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with a matching IP address in
the ARP list, but with an unrecognized MAC address.
4. 13. 1. Binding Settings
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the
router.
2. Go to
IP & MAC Binding
>
Binding Settings
.
3. Select
Enable
for ARP Binding and click
Save
.
• To add IP & MAC Binding entries:
1. Click
Add New
.
2. Enter the MAC address and IP address.
3. Tick the
Bind
checkbox and click
Save
.
• To modify or delete an existing entry:
1. Select the desired entry in the table.
2. Click
Edit
or
Delete Selected
.
4. 13. 2. ARP List
To manage a device, you can observe the device on the LAN by checking its MAC
address and IP address on the ARP list, and you can also configure the items. This page
displays the ARP list which shows all the existing IP & MAC Binding entries.
Downloaded from