manualshive.com logo in svg

TP-Link TL-WPS510U, User Manual, Page: 51 / 51

Share
Download
TP-Link TL-WPS510U User Manual Download Page 51

  

45

Appendix C:  Additional Installation Instructions 

Panasonic KX-P6100/6300/6500 

If you are using a Panasonic KX-P6100/6300/6500 laser printer with the print server through the 

Network 

Print Port

 under Windows 95/98, please redirect the printer named “

Panasonic KX-P6100 PCL

” or 

“

Panasonic KX-P6300 PCL

”, or “

Panasonic KX-P6500 PCL

” to the print server through the 

Network 

Print Port

. 

DO NOT redirect the printer named “Panasonic KX-P6100 GDI”, “Panasonic KX-P6300 GDI”, or 
“Panasonic KX-P6500 GDI” to the print server. 

Please note that the print server doesn’t support printing with host-based printers, e.g. CAPT, 
GDI, and PPA printers. Furthermore, the print server doesn’t support any non-printing functions 
of MFP (Multiple Function Printer). 

In case of static electricity or noise of power cable issue causes print server to disconnect, please re-plug 
the USB cable or re-start power to connect again. 

Summary of Contents for TL-WPS510U




















































Reviews:

No comments