manualshive.com logo in svg

TP-Link TL-WPS510U, User Manual, Page: 33 / 51

Share
Download
TP-Link TL-WPS510U User Manual Download Page 33

  

27

 

¾

 

Use DHCP/BOOTP:

 This option allows you to view DHCP/ BOOTP status.

 

If there is a 

DHCP/BOOTP server on your network, this option allows the print server to obtain IP-related 
settings automatically from your DHCP server. 

¾

 

IP Address:

 This option allows you to view IP address from the print server. The IP address 

must meet the IP addressing requirements of the network segment. (default: 192.168.0.10) 

¾

 

Subnet Mask: 

This option allows you to view subnet mask from the print server. 

¾

 

Gateway: 

This option allows you to view gateway from the print server. 

5.4  Setup Menu 

Meanwhile, you have finished the IP address configuration with print server. You should use web browser 
to configure the print server. The setup menu of the print server helps administrator to setup the print 
server. 

Preparation 

Enter the IP address of the print server as the URL, default: 192.168.0.10. Then the print server’s home 
page will appear in content of the web browser. 

Please follow this information in the setup menu of the print server: 

Summary of Contents for TL-WPS510U




















































Reviews:

No comments