SSID:TP-LINK_XXXX
SSID:TP-LINK_XXXX_5G
Wireless Password:XXXXXXXX
Ethernet Cable
Extender
TL-WPA7617
Adapter
TL-PA7017P
Pow
erline
1
Plug the adapter into a power outlet
and connect it to the router’s LAN
port via an Ethernet cable.
2
Tip:
Want to unify or personalize your network? See the back
page for instructions.
Plug the extender into a power outlet on the same electrical circuit.
Wait until the extender’s Powerline LED turns on.
Note:
If the LED is off, please refer to
FAQ
>
Q2
.
3
Connect your devices to the internet using the default SSID (network
name) and password on the label at the top of the extender.
Attention
2. Plug powerline devices into wall outlets instead of power strips.
Note:
Using power strip will affect network performance or even cause connection drops.
1. Use the product only in the upright direction.
Wall Outlet
Power Strip
Quick Installation Guide
Plug and Play
Router
WAN L
AN
* TL-WPA7617 KIT (European version) is used for demonstration in this guide.
* Images may differ from actual products.
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
Wireless Password:XXXXXXXX
On
SS
ID:T
P-L
INK
_XX
XX
SSID:T
P-L
INK
_XX
XX
_5G
Wireless
Pas
sw
ord
:XX
XX
XX
XX
