47
Chapter 4
Configure the Access Point
• Rate
- The Throughput unit.
• Run Time
- How long this function is running.
• Transmit
- Wireless transmit rate information.
• Receive
- Wireless receive rate information.
Click
Start
/
Stop
to start or stop wireless throughput monitor.
4. 5. System Tools
4. 5. 1. SNMP
Simple Network Management Protocol (SNMP) is a popular network monitoring and
management protocol.
1. Visit
, and log in using
admin
(all lowercase) for both username and password.
2. Go to
System Tools
>
SNMP
.
• SNMP Agent
- Select the radio button before Enable will enable this function if you
want to have remote control through SNMPv1/v2 agent with MIB-II. Select the radio
button before Disable will disable this function. The default setting is Disable.
Downloaded from