33
Chapter 4
Configure the Access Point
• Channel Width
- Determines the channel width to be used. It is unnecessary to change
the default value unless required.
• Enable Wireless Radio
- Select or deselect this check box to allow or deny wireless
stations to access the device.
• Enable SSID Broadcast
- Select or deselect this check box to allow or deny the device
to broadcast its name (SSID) on the air. If it’s allowed, when wireless clients survey the
local area for wireless networks to associate with, they will detect the SSID broadcast
by the device.
Note:
To apply any settings you have altered on the page, please click the
Save
button, and then you will be reminded to reboot
the device.
4. 4. 2. Wireless Security
1. Visit
, and log in using
admin
(all lowercase) for both username and password.
2. Go to
Wireless
>
Wireless Security
.
3. Configure the security settings of your wireless network and click
Save
.
The security options
are different for different operation mode.
Access Point
• Disable Security
- Check this box radio button to disable wireless security. If disabled,
the wireless stations will be able to connect this device without encryption. It is
strongly recommended that you choose one of the security types to enable security.
Downloaded from
