Configuration Guide
720
Configuring SNMP & RMON
RMON Configurations
Specify the entry ID, the port to be monitored, and the owner name of the entry. Set the
entry as valid or underCreation, and click
Create
.
ID
Enter the ID of the entry.
Port
Click
Choose
to specify an Ethernet port to be monitored in the entry, or enter the
port number in the format of 1/0/1.
Owner
Enter the owner name of the entry with1 to 16 characters.
Status
Set the entry as valid or underCreation. By default, it is valid.
Valid: The entry is created and valid.
underCreation: The entry is created but invalid.
5.1.2 Configuring History
Choose the menu
SNMP > RMON > History
to load the following page.
Figure 5-2
History Control Table
Follow these steps to configure history:
1) Select a history entry, and specify a port to be monitored.
Index
Displays the index of history entries. There are 12 history entries all together.
Port
Specify a port in 1/0/1 format to be monitored. To change the port, please
enable the entry first.
2) Set the sample interval and the maximum buckets of history entries.
