Configuration Guide
680
Configuring Maintenance
System Log Configurations
3.1.4 Viewing the Log Table
Choose the menu
Maintenance > Log> Log Table
to load the following page.
Figure 3-4
Viewing the Log Table
Select a module and a severity to view the corresponding log information.
Time
To get the exact time when the log event occurs, you need to configure the system
time on the
System > System Info > System Time
Web management page.
Module
Select a module from the drop-down list to display the corresponding log information.
Severity
Select a severity level to display the log information whose severity level value is the
same or smaller.
3.2 Using the CLI
3.2.1 Configuring the Local Log
Follow these steps to configure the local log:
Step 1
configure
Enter global configuration mode.
