Configuration Guide
46
Managing System
System Tools Configurations
Select
Select one or more units to be configured.
Unit
Displays the number of the unit.
Current Startup
Image
Displays the current startup image.
Next Startup
Image
Select the next startup image. When the switch is powered on, it will try to start up
with the next startup image. The next startup and backup image should not be the
same.
Backup Image
Select the backup image. When the switch fails to start up with the next startup
image, it will try to start up with the backup image. The next startup and backup
image should not be the same.
2) Click
Apply
.
4.1.2 Restoring the Configuration of the Switch
Choose the menu
System
>
System Tools
>
Config Restore
to load the following page.
Figure 4-2
Restoring the Configuration of the Switch
Follow these steps to restore the configuration of the switch:
1) In the
Config Restore
section, select one unit and one configuration file.
Target Unit
Select a member switch to import configuration file. .
Config file
Select the desired configuration file to import.
2) Click
Import
to import the configuration file.
Note:
•
It will take a long time to restore the configuration. Please wait without any operation.
•
After the configuration is restored successfully, the device will reboot to make the configura-
tion change effective.
