User Guide 28
Switching
Configuring LAG
4
Configuring LAG
Choose the menu
Switching > LAG
to load the following page.
Figure 4-1
Configuring LAG
Follow these steps to configure LAG:
1) Select the desired LAG group from the drop-down list.
2) Click the ports to add to the LAG group. Click
Apply
.
3) In the table below, you can verify the LAG configuration result. You can select the LAG
and click
Delete
to delete ports from the LAG group.
Group ID
Displays the ID of the LAG group.
Ports
Displays the LAG member ports.
