TL-R488T
Load Balance Broadband Router User Guide
46
Filtering, MAC Address Filtering and Screen are disabled, and their settings are ineffective in the
default settings.
Figure 4-30
¾
Enable Firewall
-
Enable the general firewall switch or not.
¾
Enable IP Filtering
-
Enable the IP Address Filtering or not. There are two default filtering
rules, please select the rule for your need.
¾
Enable Domain Filtering
-
Enable the Domain Filtering or not.
¾
Enable MAC Filtering
-
Enable MAC Address Filtering or not. There are two default filtering
rules, please select the rule for your need.
¾
Enable Screen -
Enable the screen function or not.
4.6.2
IP Filtering
Choose menu “
Security
→
IP Filtering
”, you can configure the IP Address filtering rule in the next
screen (shown in Figure 4-31). The IP Address Filtering feature allows you to control Internet
Access by specific users on your LAN based on their IP addresses.
