Configuring Preferences
IP Group Configuration
Configuration Guide
49
2.2 Grouping IP Address Entries
Choose the menu
Preferences > IP Group > IP Group
and click
Add
to load the following
page.
Figure 2-2
Create an IP Group
Follow these steps to create an IP group and add IP address entries to the group:
1) Specify a name and configure the range to add an IP address range.
Group Name
Enter a name for the IP group. Only letters, digits or underscores are allowed.
Address Name
Select the IP address entries as the members of the group from the drop-down
list. It is multi-optional.
If no IP address entries are selected, the rule that references this IP group will
have no effect on any IP addresses.
Description
(Optional) Enter an brief description of this IP group to make identifying it easier.
2) Click
OK
.
You can also choose an existing IP group and click to add or remove the IP address
members.
Note:
An IP group that is being referenced by a rule cannot be deleted.
