Quick Installation Guide
TD-W8901N
150Mbps Wireless N ADSL2+ Modem Router
Connecting the Hardware
If you don’t need the phone service, just skip step 1 and directly
connect the modem router to the phone jack with a phone cable,
then follow steps 3 and 4 to complete the hardware connection.
POWER
ON/
OFF
WiF
i
WPS
/
RESE
T
LAN4
LAN1
LAN3
LAN2
ADSL
ADSL Splitter
Phone Jack
Power Adapter
Modem Router
3
Turn on the modem router.
Connect the ADSL splitter to
the phone jack.
PHONE
MODEM
LINE
1
Connect the modem
router to the ADSL splitter.
2
Connect to the phone (Optional)
Wireless
Power
On
Notes:
1. The ADSL LED takes about 1 to 2 minutes to
stabilize.
ADSL
On
On
4
Verify that the hardware connection
is correct by checking these LEDs.
2. If the Wireless LED is off, please press the WiFi
button on the rear panel, then the LED should turn
stable in a few seconds.
