LAG:
Displays the LAG number which the port belongs to.
Note:
1.
The member port of a LAG cannot be set as a monitoring port or monitored port.
2.
A port cannot be set as the monitoring port and monitored port at the same time.
6.1.3
Port Security
You can use this feature to limit the number of MAC addresses that can be learned on each
port, thus preventing the MAC address table from being exhausted by the attack packets.
Choose the menu
Switching
→
Port
→
Port Security
to load the following page.
Figure 6-4 Port Security
Configuration Procedure:
1)
Select one or multiple ports for security configuration.
2)
Specify the maximum number of the MAC addresses that can be learned on the port, and
then select the learn mode of the MAC addresses.
3)
Select the status of the port security feature.
4)
Click
Apply
to make the settings effective.
57
