Choose the menu
System
→
System Tools
→
System Reboot
to load the following page.
Figure 4-16 System Reboot
Note:
To avoid damage, please don't turn off the device while rebooting.
4.3.6
System Reset
On this page you can reset the specified unit in the stack to the default. All the settings will be
cleared after the switch is reset.
Choose the menu
System
→
System Tools
→
System Reset
to load the following page.
Figure 4-17 System Reset
Note:
The System Reset option will restore the configuration to default and your current settings will
be lost.
4.4
Access Security
Access Security provides different security measures for the remote login so as to enhance
the configuration management security. It can be implemented on
Access Control
,
HTTP
Config, HTTPS Config
,
SSH Config
and
Telnet Config
pages.
4.4.1
Access Control
On this page you can control the users logging on to the Web management page to enhance
the configuration management security. The definitions of Admin and Guest refer to
. This function only applies to Web, SNMP, Telnet, SSL and SSH.
30
