10.9.1
Process
Choose the menu
Routing→OSPF→Process
to load the following page.
Figure10-47 OSPF Process
Configuration Procedure:
1)
Specify a Process ID.
2)
Configure the router ID.
3)
Click
Apply
.
Entry Description:
OSPF Process Config
Process ID:
The 16 bit integer that uniquely identifies the OSPF process,
ranging from 1 to 65535.
Router ID:
The 32 bit unsigned integer in dotted decimal format that
uniquely identifies the router within the autonomous system
(AS).
OSPF Process Table
Select:
Select the desired item for configuration. It is multi-optional.
Process ID:
Displays the configured OSPF process.
Active Router ID:
Displays the active router ID that is currently used by the
process.
Router ID:
Displays the router ID that you configured before. When you
change the router ID of a process, it will not take effect until
you restart the process.
Status:
Displays the status of the process.
Running: The process is running and its router ID has
been configured or auto selected.
Pending: The process has no router ID and cannot start.
220
