Configuring Maintenance
Monitoring the System
Configuration Guide
703
2.2 Using the CLI
2.2.1 Monitoring the CPU
On privileged EXEC mode or any other configuration mode, you can use the following
command to view the CPU utilization:
show cpu-utilization
View the memory utilization of the switch in the last 5 seconds, 1minute and 5minutes.
The following example shows how to monitor the CPU:
Switch#show cpu-utilization
Unit | CPU Utilization
No. | Five-Seconds One-Minute Five-Minutes
------+-------------------------------------------------
1 | 13% 13% 13%
2.2.2 Monitoring the Memory
On privileged EXEC mode or any other configuration mode, you can use the following
command to view the memory utilization:
show memory-utilization
View the memory utilization of the switch in the last 5 seconds, 1minute and 5minutes.
The following example shows how to monitor the memory:
Switch#show memory-utilization
Unit | Current Memory Utilization
------+----------------------------
1 | 74%
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
