Configuration Guide
526
Configuring PoE
Example for PoE Configurations
Figure 4-4
Configure the Port
4.4 Using the CLI
The configurations of port 1/0/4 is similar with the configuration of port 1/0/3. Here we take
port 1/0/3 for example.
1) Create a time-range.
Switch_A#config
Switch_A(config)#power time-range “office time”
Switch_A(config-time-range)#holiday exclude
Switch_A(config-time-range)#periodic start 08:30 end 23:00 day-of-the-week 1-5
Switch_A(config-time-range)#exit
2) Create a holiday.
Switch_A(config)#power holiday Christmas start-date 12/22 end-date 12/31
3) Enable the PoE function on the port 1/0/3. Specify the basic parameters for the port
1/0/3 and bind the time-range “office time” to the port.
Switch_A(config)#interface gigabitEthernet 1/0/3
Switch_A(config-if)#power inline supply enable
Switch_A(config-if)#power inline time-range “office time”
Switch_A(config-if)#end
Switch_A#copy running-config startup-config
Verify the Configuration
Verify the configuration of the holiday:
Switch_A#show power holiday
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
