Configuration Guide
456
Configuring QoS
Bandwidth Control Configuration
3
Bandwidth Control Configuration
To implement bandwidth control, you can:
Limit the ingress/egress traffic rate on each port by configuring the Rate Limit function;
Limit the broadcast, multicast and UL frame forwarding rate on each port to avoid
network broadcast storm by configuring the Storm Control function.
3.1 Using the GUI
3.1.1 Configuring Rate Limit
Choose the menu
QoS > Bandwidth Control > Rate Limit
to load the following page.
Figure 3-1
Rate Limit
Follow these steps to configure the Rate Limit function:
1) Configure the upper rate limit for the port to receive and send packets.
Ingress Rate (1-
1000000Kbps)
Configure the upper rate limit for receiving packets on the port. The valid values
are from 1 to 1000000 Kbps.
Egress Rate (1-
1000000Kbps)
Configure the bandwidth for sending packets on the port. The valid values are
from 1 to 1000000 Kbps.
LAG
Displays the aggregation group which the port is in.
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
