Configuring Protocol VLAN
Protocol VLAN Configuration
Configuration Guide
213
2.1.2 Creating Protocol Template
Choose the menu
VLAN > Protocol VLAN > Protocol Template
to load the following page.
Figure 2-1
Create a Protocol Template
Follow these steps to create a protocol template:
1) Check whether your desired template already exists in the
Protocol Template Table
section. If not, create it in the
Create Protocol Template
section.
Protocol Name
Enter the name of the new protocol template.
Ether Type
Enter the Ethernet protocol type value for the protocol template.
This value is the EtherType field in the Ethernet frame and is used to specify the
data type of the frame.
2) Click
Create
to create the protocol template.
Note:
A protocol template that is bound to a VLAN cannot be deleted.
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
