58
9.2
ip http max-users
Description
The
ip http max-users
command is used to configure the maximum number
of users that are allowed to connect to the HTTP server. To cancel this
limitation, please use
no ip http max-users
command.
Syntax
ip http max-users
admin-num guest-num
no ip http max-users
Parameter
admin-num
—— The maximum number of the users logging on to the HTTP
server as Admin, ranging from 1 to 16. The total number of Admin and Guest
should be less than 16.
guest-num
—— The maximum number of the users logging on to the HTTP
server as Guest, ranging from 0 to 15.The total number of Admin and Guest
should be less than 16.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Configure the maximum number of the Admin and Guest users logging on to
the HTTP server as 5 and 3:
T1600G-52TS(config)# ip http max-users
5 3
9.3
ip http session timeout
Description
The
ip http session timeout
command is used to configure the connection
timeout of the HTTP server. To restore to the default timeout time, please use
no ip http session timeout
command.
Syntax
ip http session timeout
minutes
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
