50
encrypted password is configured, you should use the corresponding
unencrypted password if you re-enter this mode.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
User Guidelines
If the password you configured here is unencrypted and the global
encryption function is enabled in
, the
password in the configuration file will be displayed in the symmetric
encrypted form.
Example
Add and enable a new admin user named “tplink”, of which the password is
“admin” and unencrypted:
T1600G-52TS(config)#user name
tplink
privilege
admin
password
0 admin
8.2
user name (secret)
Description
The
user name
command is used to add a new user or modify the existed
users’ information. To delete the existed users, please use
no user name
command. This command uses the MD5 encryption.
Syntax
user name
name
[
privilege
admin | operator | power_user | user ]
secret
{ [ 0 ]
password
| 5
encrypted-password
}
no user name
name
Parameter
name
——Type a name for users' login, which contains 16 characters at most,
composed of digits, English letters and under dashes only.
admin | operator | power_user | user —— Access level. “admin” means that
you can edit, modify and view all the settings of different functions. “operator”
means that you can edit, modify and view most of the the settings of different
functions. “power-user” means that you can edit, modify and view some of
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...