38
6.5
switchport voice vlan mode
Description
The
switchport voice vlan mode
command is used to configure the Voice
VLAN mode for the Ethernet port.
Syntax
switchport voice vlan mode
{
manual | auto }
Parameter
manual | auto
—— Port mode.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet / interface port-channel / interface range port-channel)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the port 1/0/3 to operate in the auto voice VLAN mode:
T1600G-52TS(config)# interface gigabitEthernet
1/0/3
T1600G-52TS(config-if)# switchport voice vlan mode
auto
6.6
switchport voice vlan security
Description
The
switchport voice vlan security
command is used to enable the Voice
VLAN security feature. To disable the Voice VLAN security feature, please
use
no switchport voice vlan security
command.
Syntax
switchport voice vlan security
no switchport voice vlan security
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
