331
Example
Configure a RADIUS server with the IP address as 1.1.1.1, authentication port
as 1200, timeout as 6 seconds, retransmit times as 3, and the unencrypted
key string as 12345.
T1600G-52TS(config)#
radius-server host
1.1.1.1
auth-port
1200
timeout
6
retransmit
3
key
12345
34.5
show radius-server
Description
This
show radius-server
command is used to display the summary
information of the RADIUS servers.
Syntax
show radius-server
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Display the information of all the RADIUS servers:
T1600G-52TS(config)# show radius-server
34.6
aaa group
Description
This
aaa group
command is used to create AAA server groups to group
existing /RADIUS servers for authentication. This command puts
the switch in the server group subconfiguration mode.
To delete the corresponding AAA group, please use the
no aaa group
command.
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
