305
30.12
show lldp
Description
The
show lldp
command is used to display the global configuration of LLDP.
Syntax
show lldp
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the global configuration of LLDP:
T1600G-52TS#show lldp
30.13
show lldp interface
Description
The
show lldp interface
command is used to display LLDP configuration of
the corresponding port. By default, the LLDP configuration of all the ports will
be displayed.
Syntax
show lldp interface
[
gigabitEthernet
port
]
Parameters
port
—— The Ethernet port number
.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the LLDP configuration of Gigabit Ethernet port 1/0/1:
T1600G-52TS#show lldp interface gigabitEthernet
1/0/1
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
