290
Syntax
rmon statistics
index
interface gigabitEtherne
t
port
[
owner
owner-name
]
[
status
{ underCreation | valid }]
no rmon statistics
index
Parameter
index
—— The index number of the statistics entry, ranging from 1 to 65535,
in the format of 1-3,5.
port
—— The statistics port number, in the format of 1/0/1.
owner-name
—— The creator of the event entry, ranging from 1 to 16
characters. By default, it is “monitor”.
status —— The status of the statistics entry, either “underCreation” or
“valid”. “underCreation” means this entry won’t take effect until it is modified
to “valid”; “valid” means this entry takes effect immediately after it is created.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Configure the statistics entries 1-3 with the statistics port as 1/0/1, owner as
owner1 and status as valid:
T1600G-52TS(config)#rmon statistics
1-3
interface gigabitEthernet
1/0/1
owner
owner1
status
valid
29.16
show snmp-server
Description
The
show snmp-server
command is used to display SNMP configuration
globally.
Syntax
show snmp-server
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
