105
15.6
dot1x quiet-period
Description
The
dot1x quiet-period
command is used to enable the quiet-period function.
To disable the function, please use
no dot1x quiet-period
command.
Syntax
dot1x quiet-period
[
time
]
no dot1x quiet-period
Parameter
time
—— The length of the quiet-period time. If one user’s authentication fails,
its subsequent IEEE 802.1x authentication requests will not be processed
during the quiet-period time. It ranges from 1 to 999 seconds and the default
value is 10 seconds.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable the quiet-period function:
T1600G-52TS(config)#dot1x quiet-period
Enable the quiet-period function and set the quiet-period as 5 seconds:
T1600G-52TS(config)#dot1x quiet-period
5
15.7
dot1x timeout
Description
The
dot1x timeout
command is used to configure the supplicant timeout. To
restore to the default, please use
no
dot1x timeout
command.
Syntax
dot1x timeout
supplicant-timeout
time
no dot1x timeout
supplicant-timeout
Summary of Contents for T1600-28TS
Page 1: ...CLI Reference Guide T1600G Series Switches REV2 0 0 1910011957...
Page 57: ...41 T1600G 52TS config show voice vlan switchport gigabitEthernet 1 0 2...
Page 64: ...48 Example Display the LACP system priority T1600G 52TS config show lacp sys id...
Page 365: ...349 Example Display the configuration of DHCP Relay T1600G 52TS config show ip dhcp relay...
