Installation Guide
LED Explanation
Connection
Configuration
TL-R605
Modem
Internet
On:
Power on
Off:
Power off
Power
Flashing:
System running normally
On/Off:
System running abnormally
System
Note:
For simplicity, we take TL-R605 as an example throughout this Guide.
© 2020 TP-Link
7106508730 REV1.0.0
SafeStream Gigabit Multi-WAN VPN Router
Option 1: Standalone Mode
Open a web browser and type the default management address
192.168.0.1
in the address field of the browser, then press the
Enter
key.
2.
Connect a computer to a LAN port of the router with an RJ45 cable
properly. If your computer is configured with a fixed IP, change it to
Obtain
an IP address automatically
.
1.
For detailed configurations, refer to the User Guide of the router. The guide
can be found on the download center of our official website:
https://www.tp-link.com/support/download/
.
Create a username and a password for subsequent login attempts and
for security.
3.
Use the username and password set above to log in to the webpage.
4.
After a successful login, you can configure the function by clicking the
setup menu on the left side of the screen.
5.
Link/Act and 1000Mbps
(for TL-ER7206)
The router supports two configuration options:
Standalone Mode: Configure and manage the router singly.
Controller Mode: Configure and manage the network devices centrally. It is recommended in the large-scale network, which consists of mass devices such as
access points, switches, and gateways.
Note:
Use the charger provided in the
package to power on the router.
On:
There is a device connected to the port and running at 1000 Mbps.
Off:
There is no device connected to the port or not running at 1000 Mbps.
On
: There is a device connected to the port but not active.
Off
: There is no device connected to the corresponding port.
Flashing
: Transmitting or receiving data.
Router
PC
In Standalone Mode, use a computer to configure and manage the router.
Link/Act
(for TL-R605)
| SFP WAN
(for TL-ER7206)
On
: There is a device connected to the port but not active.
Off
: There is no device connected to the corresponding port.
Flashing
: Transmitting or receiving data.
Note: When the router is managed by a controller, configurations of the router will be overriden by the controller.
